Serv-A-Pure Co.

Company:Serv-A-Pure Co.
Product: Water purification systems for hemodialysis
Date: 10/10/2002

Design Control and Design Inputs and Outputs. Your response to FDA-483 observation # 4 addresses the specific observation that the records were not signed and dated. We are concerned that the records referred to in this observation are maintained on a computer system, and your response states in Section 3.3, “All critical design records and documents are dated and signed by an engineer on staff.” You need to establish and maintain a system of hard copy design records, such as required by the Design History File element of the Design Control regulation. These signed and dated documents must be considered the official design records. Continuing our review of your response to #4, you referenced the expanded sections 3.3 through 3.6 of your quality manual, therefore we have also reviewed that material. Section 3.6, Quality Engineering Design Practices, appears to be your attempt to address the Design Control elements required by 21 CFR 820.30, but you have not included all the elements listed in that regulation, and you have modified the order in which they are listed. We believe you should review the Design Control regulation, and we also suggest you review Chapter 3 of the FDA publication manual recommended above.

FDA District: Detroit District Office

About the author

Amy enjoys researching and writing about developments in medical technology and how that intersects with US law. She received her J.D. from the University of Florida Levin College of Law in 2020 and now works as a Regulatory Associate for SoftwareCPR®, a general-purpose regulatory consulting firm that is recognized globally for their expertise with standards and national regulations pertaining to medical device, mobile medical app, and HealthIT software.

SoftwareCPR Training Courses:

IEC 62304 and other Emerging Standards Impacting Medical Device Software

Being Agile & Yet Compliant

ISO 14971 SaMD Risk Management

Software Risk Management

Medical Device Cybersecurity

Software Verification

IEC 62366 Usability Process and Documentation

Or just email training@softwarecpr.com for more info.

Corporate Office

15148 Springview St.
Tampa, FL 33624
USA
+1-781-721-2921
Partners located in the US (CA, FL, MA, MN, TX) and Canada.